Wheel Well Box with Removable Bed
Wheel Well Box with Removable Bed
Wheel Well Box with Removable Bed
Wheel Well Box with Removable Bed
Wheel Well Box with Removable Bed
Wheel Well Box with Removable Bed
Wheel Well Box with Removable Bed
Wheel Well Box with Removable Bed
Wheel Well Box with Removable Bed
Wheel Well Box with Removable Bed

Wheel Well Box with Removable Bed

Regular price$2,463.00
/

  • Free Shipping
  • Assembled in the USA
  • Ethically Sourced & Eco-Friendly Materials
  • Covered Under Warranty

These wheel well boxes are designed with easy garage access and built to conceal most wheel well water tanks and electrical setups on the market. This comes with a set of two (2) wheel well boxes and one removable/fixed bed. 

 

NOTE: Paint options consist of a satin paint with a Prefinished Maple base. Only the exterior is painted, leaving the inside and back of the cabinet to show the Prefinished Maple. 

See the Spec Sheet for more information

- Lightweight Construction and Easy to Install
- Outside Dimensions: 48"-73" Width x 33" Height x 20" Depth
- Inside Dimensions: 46" - 71" Width x 30.5" Height x 17" Depth
- Backing is removable with extended #2 bit for water tank installation.
- Soft close hinges with latches for wiring/plumbing access.
- minimal footprint to fit just about any model van.
- Bed material matches cabinet material
- (2) bed platform sections with powder coated aluminum stiffeners
- Maple and alder are paint-grade

Note: 

  • Hardware is visible from the outside of this cabinet.
  • For shallow units (10-18") with a shower, the wheel well boxes should be installed 4-6" from the edge of the vertical pillar at the rear of your vehicle to allow the shower door to open properly.

The included power system designed and engineered by Valley Hi Vans comes preinstalled in your wheel well box prior to shipping with ventilation precut and unit ready for install.

Valley Hi Standard Power System (400 AMP/HR)
Leveraging our experiences in Electrical Engineering and Off-Grid power delivery . We are able to offer pre-built, pre-programmed, and pre-tested  power solutions.

  • 400 AMP/Hrs of BattleBorn Batteries
  • 2000 VA Victron Energy Inverter /Charger
  • Up to 700 Watts of Solar
  • 30 Amp Alternator Charging
  • 30 Amp Shore Power Connection

System Includes :
1 DC DISTRIBUTOR BLUE SEA SYSTEMS 5026
2 1 AC DISTRIBTUOR MIDNITE SOLAR MNBABYBOX
3 1 AC BREAKER MIDNITE SOLAR MNEAC
4 1 INVERTER/CHARGER VICTRON ENERGY 12 VOLT / 2000 VOLTAMPS / 80 AMP
5 1 MAIN DISCONNECT BLUE SEA SYSTEMS 9003E
6 1 SHUNT VICTRON ENERGY BMV - 712
7 1 LYNX DISTRIBUTOR VICTRON ENERGY 1000 DC
8 1 SOLAR CHARGING VICTRON ENERGY MPPT 100 / 30
9 1 ALT CHARGING VICTRON ENERGY 12 / 12 - 30
10 4 BATTERY BATTLEBORN BATTERIES BB10012
11 1 DC BREAKER MIDNITE SOLAR MNEPV
12 1 MAIN BATTERY FUSE BLUE SEA SYSTEMS 5503Cerbo GX and GX Touch 70 available upon request.

- Our 2-piece removable bed is made from material matching your boxes and spans nearly wall-to-wall. 
- Dimensions are ~70" width x 54" depth x 3/4"  height
- Bed held onto wheel well boxes using hook and loop to prevent sliding and allow for easy removal. 
- Each bed section has 2x handle cutouts for removal/installation
- Mattress is a low profile custom 4.5" Memory foam with a knit cotton cover. Each mattress is sewn custom to your bed size.

- Mattress is CFR1633 certified (passes the federal flammability guidelines) 
- Bed panels have 3/4" Aluminum track on the edge to hold without bowing. 
- Removable bed weighs ~ 45lbs

Installation Difficulty: Easy | 2 people
Installation Time: 1 Hour
Tools Needed: Power Drill, Rivet Nut Tool, Screw Driver, Drill Bits

  • How do wheel well boxes mount?

The wheel well boxes are designed to shoot into the wall and the sub-floor. We recommend using rivet nuts inserts for the wall but self-tapping screws will work for most builds.  

  • What goes inside of the wheel well boxes?

The wheel well boxes are designed to house all water tanks, plumbing, and electrical. Easy access hinged doors allow you to get in and out for a smooth installation and maintenance. Electrical equipment may be mounted to the inside of the wheel well box or to the wheel well panels behind the box. We would recommend cutting ventilation for electrical equipment, heaters, or pumps.

  • How is the bed removable?

The bed is designed in two identical sections that are removable via two handle cutouts on each. The beds are primarily mounted on top of the wheel well boxes for a minimal open-garage style bed but can be taken out to accommodate tall items for transport.

  • How do I apply paint, stain, or sealer?

If you plan on painting:

  • lightly scuff the entire surface of the cabinet that you plan on coating with 120-180 grit sandpaper.
  • Apply 2-3 coats of primer prior to applying your main coat.
  • Always apply a finish when you're happy with the paint to get a long lasting appearance.

If you plan on staining:

  • Sand the surface on all faces with sandpaper traveling with the grain of the wood.
  • Apply stain very cautiously to a section of the cabinet that will not be visible to gage the volume and pressure you need to achieve the look you want.
  • Apply stain evenly with a rag, sponge, or spray gun until all surfaces are coated.
  • Please note that overlapping surfaces may make the stain darker on the overlapped areas.
  • Always apply a finish when you're happy with the stain to get a long lasting appearance.

For Butcher Blocks and Slabs

  • For most units, there are phillips head screws holding the butcher block to the cabinet base that will need to be removed.
  • If staining, sand the butcher block thoroughly with 120-180 grit sandpaper. 
    • Apply a sample on the underside of the butcher block to find a volume and pressure that achieves the color you'd like.
    • Apply stain evenly with a rag, sponge, or spray gun until all surfaces are coated.
    • Please note that overlapping surfaces may make the stain darker on the overlapped areas.
    • Always apply a food-grade finish when you're happy with the stain to get a long lasting appearance.
  • If sealing with oil or wax, make sure the oil or wax is food grade and apply evenly with a soft rag or sponge. 
    • Allow to dry and re-coat one or two more times.

Order Changes

Once an order is placed, we ask that all changes (concerning appliances, width, add-ons, material) be made in the following 7 DAYS. Any changes made after this time will be charged a 30% restocking fee. This policy has been implemented to further guarantee the quality of your order and reduce any inconsistencies. 

Order Refunds

We strongly advise all customers to read over our refund policy. This is located at the top of the website home page under the "About" tab. Custom orders CANNOT be refunded once in production. The Serg Supply team will notify you when your product is going into production. Refunds cannot be issued after this point in the process. More details can be found on our Refund Policy Page.

Order Damages

If damage occurs to your order through shipping transit, please notate on your delivery documents. This will be visible by the pallet and/or the shrink wrap being damaged. After delivery, please email office@sergsupply.com for follow up. More details can be found on our Shipping Policy Page. This is located at the top of the home page under the "About" tab.

Shipping

Parcel

Orders with smaller items weighing less than 100lbs ship via UPS, FEDEX, or USPS. 

Pallet

Any orders with items weighing over 100lbs or larger than 72" in any direction must be shipped on a pallet. Update: Shipping is free!

Each pallet is insured with liftgate service + residential charge applied. If you have a commercial address with a forklift, please state it in order notes for quicker delivery.

You can see our complete shipping policy here.

Local Pickup

Want to save time on shipping? Select the local pickup option at checkout and we will notify you when your order goes into production to set a pickup date.

Product Warranty

All products are covered under a 90-day manufacturer warranty to guarantee the quality of your product and quality of construction. If you should have any quality issues with your product, contact us at office@sergsupply.com.

Serg Supply now offers installation services! 

For details on what products we service, prices, and Terms & Conditions, please review this document:

Installation Services Details

To schedule an installation, please email us at office@sergsupply.com or you can schedule an appointment on our website under the "Installation" top tab. Please state which product you wish to install, vehicle type, and if there are already products installed into your vehicle. 

Most items over 100lbs ship on a pallet. Lift gate service is included with all palletized orders.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Abdul Rahimi
This is a product worth your$

This is a product worth your money in terms of quality and responsiveness

B
Ben
Love our wheel well boxes

The boxes are beautiful and well made. Very sturdy and the maple has a lovely grain to it. We installed them ourselves and it was pretty easy. Highly recommend. Good customer service.

Go Out There

Chase Adventure

Traveling in your van conversion can be beautiful and comfortable with the right kit.

Easy Install Guides

Every product comes with it's own downloadable PDF installation guides for the quickest install possible.

Satisfied Serg Supply Customers

★★★★★

Great product! Very well made and the team at Serg Supply were incredibly helpful throughout. Prompt responses and very knowledgeable. I’ve had no problems at all. Would highly recommend! 

Albert Rodrigue

Yosemite, CA

★★★★★

I can’t even begin to explain how incredible these kits are. Their Team is super flexible and easy to work with. Literally makes the hardest part of doing a van build fun and cohesive. The pieces fit together perfectly and the customer service and response times with questions is unbeatable.

Chase Coffin

Santa Clara, CA

★★★★★

I took a chance on ordering from Serg Supply. It was a good investment, while we had a little hiccup in shipping, they quickly fixed it to this customer satisfaction. These high-graded, simply elegant and yes finely crafted storage spaces add to the elegance in my van.

Kristine Elite

Nashville, TN

★★★★★

Just now getting my panels sealed and installed, and everything fits awesome and is super easy to install! Thank you!

Amy Weaver

Fair Oaks, CA

★★★★★

Ordered three cabinets for our new Sprinter and we were not disappointed! Beautiful craftsmanship, quick turn-around time, communicative seller and more. The cabinets came pre-drilled, instructions, and a drill bit to use that matches the screws....little details that mean a lot!

Brenda Mann

Steilacoom, WA

★★★★★

so far so good! we installed these last week and they look great. the customer service was outstanding. most agreeable and helpful. the rings arrived promptly, as promised. thank you.

Bill Houston

Dallas, TX

★★★★★

I have purchased several server also items. I would have to say there customer service is excellent and top notch. Also a lot of other companies can learn from them and how to deal with customers and customer relations

Bryan Livingston

Seattle, WA

★★★★★

The quality of the work was outstanding. They made adjustments and accommodation for my low roof Sprinter and were very generous with providing materials, thoughtful instruction and creative solutions - will absolutely work with them again on every van build!

Cambrea Ezell

Seattle, WA