This is a specialized ceiling kit made to fit your Ram Promaster!

Our Promaster kit is the easiest kit on the market for DIY installation and CNC precision cut for the best possible fit.

EXT Models: Please reach out to us! We can make upon request!

Custom Fan Cutouts: Our team can pre-cut for a fan for you if requested for an additional charge of $250. Please email office@sergsupply.com after placing your order.  We will send you measurements needed and the updated invoice.

• Extends to within 1/2" (12mm) of your factory wall edge
  
  
• Outer rows wrap around factory beams 
  
  
• Requires 3/4" furring strips to be fastened to factory beams using rivet-nuts
  
  
• Panels are fastened to furring strips with 1-1/4" finish screws
  
  
• Cover panels in the front and rear help hold panel spacing. Front cover panel is widened for easier drill access to holes above factory cockpit shelf
  
  
• Union panels hold rows together from the backside to hold a consistent 1/8" gap between panels
  
  
• Single row lighting contains 6 lights, dual row contains 12. (If custom Fan Cutouts are requested - the position and quantity of the lights may be affected) 

• Prefinished Maple
  
• Prefinished Birch
• Unfinished Maple
• Natural Bamboo
• Amber Bamboo

Please refer to our materials page here to see images and details of each option: Materials

• Ceiling Panels
• Rivet Nuts
• Threaded Screws and Washers
• Proper Drill Bit
• Instructions
• Light Pucks (12VLED) - If choosing Puck Light option. Also includes 12v distribution block (holds up to 8 lights), and AC-to-12VDC adapter

• Material: 1/2" Plywood
• Weight: 40-60 lbs
  
• Width of Panels: Panels are range from 6 1/8" to 6 1/4"
• Puck light holes: 2.125" Bore

Each kit comes with detailed directions on how to install your own ceiling kit. These kits are designed to fit your ceiling by screwing to furring strips that are held onto your ceiling with Rivet Nuts.

Installation Difficulty: Medium | 2 people

Installation Time: 4-6 Hours
Tools Needed: Power Drill, Rivet Nut Tool

• How does the ceiling kit mount?
  

All Ram Promaster kits are designed to fit using furring strips. The furring strip is mounted to overhead beams using rivet nuts on factory holes and the ceiling panels are fastened to the furring strip using wood screws. The outer rows are cut to match the odd curvature of the overhead trusses in your Promaster.

• How does the ceiling kit mount?
  

All Ram Promaster kits are designed to fit using furring strips. The furring strip is mounted to overhead beams using rivet nuts on factory holes and the ceiling panels are fastened to the furring strip using wood screws. The outer rows are cut to match the odd curvature of the overhead trusses in your Promaster.

• Will the ceiling kits work with ceiling fan cutouts?

Yes, our team can pre-cut for a fan for you if requested for an additional charge of $250.  We will reach out to you once your order has been placed and we will walk you through the process of measuring for your fan cutout. 

• How do I apply stain, finish, or sealer?

Painting:

• Lightly scuff the entire surface of the product that you plan on coating with 120-180 grit sandpaper.
• Apply 2-3 coats of primer prior to applying your main coat.
• Always apply a finish when you're happy with the paint to get a long lasting appearance.

Staining:

• Sand the surface on all faces with sandpaper traveling with the grain of the wood.
• Apply stain very cautiously to a section of the product that will not be visible to gage the volume and pressure you need to achieve the look you want.
• Apply stain evenly with a rag, sponge, or spray gun until all surfaces are coated.
• Please note that overlapping surfaces may make the stain darker on the overlapped areas.
• Always apply a finish when you're happy with the stain to get a long lasting appearance.

- Fan Cutouts, A/C Cutouts, and other cuts are not standard. Please see custom options for more information.

- Have a Promaster 136 or 159 EXT? No need to worry - we have this kit for those models available upon request. 

- We can not guarantee consistency in grain or pattern in natural wood colors as they are made from real wood veneer and sometimes nature is inconsistent.

- 1/2" Plywood panels are plywood with veneer laminate and because of this, grain will be visible on sides between gaps. Panels are not edge banded as more temperate climates may cause adhesive to melt and banding to peel. For this reason, raw wood is visible on sides of panels.

- Lights are included when choosing the Single or Dual Row Puck Light option. Puck lights include: Puck lights, 12v distribution block (holds up to 8 lights), and AC-to-12VDC adapter

- This kit ships in packaged boxes for single item orders or on a pallet for larger combined orders. 

- We are not responsible for damages caused by modification of our panels for your own custom additions.

- If a panel is damaged, we won't make you purchase a new kit. Simply let us know which panel and we can ship a replacement!