Sprinter 170 Wall Panel Kit

Cover the factory interior of your Mercedes Sprinter 170 with this beautiful wall panel kit. With plenty of material options, you're able to make your van conversion fit your style. This product is compatible with the NCV3 and VS30 models.

- Driver Side Upper Panels
- Driver Side Wheel Well Panels
- Passenger Side Upper Panels
- Passenger Side Wheel Well Panels
- Rear Door Panels
- Slider Door Panels
- Installation Guide
- Rivet Nuts and Machine Screws
- Proper Sized Drill Bit

Installation Difficulty: Medium | 2 people
Installation Time: 1-3 Hours
Tools Needed: Power Drill, Rivet Nut Tool, Screw Driver, Drill Bits

Want to see more? Check out our Spec sheet

Weight: Approx. 60-130lbs

Application: Rivet Nut directly to factory holes or into furring strips

Hardware: All 1/4"-20 stainless steel machine screws + washers with zinc-coated steel rivet nuts. Black Oxide hardware is available as an option. 

• Panels are cut to size and pre-drilled for easy mounting onto factory holes in your vehicle.
• If keeping factory foam headliner blocks, your blocks (or wall panels) will need to be trimmed for a flush fit
• Holes are added at the center of the panels to prevent vibration that do not coincide with factory holes. This will require drilling and rivet-nuts for proper fitment
• Not all vans come off the factory line identical. Expect a handful of rivet nuts to be a few millimeters off-course. These need to be widened out with the drill bit or burring bit for the screws to align properly.
• Factory Window cutouts are cutouts wider than opening, where no spacers are required.
• Driver forward window is large factory window behind driver seat.
• Upholstered paneling features acoustic + thermal insulating Volara foam with low water absorption below marathon tweed

• How can I order a material that isn't listed?

Send an email to info@sergsupply.com with your request as we can offer this kit in:

• Birch
• Oak
• Walnut
• Bamboo (Natural and Carbonized)
• Upholstery-ready material
• Preupholstered Marathon tweed
• Variety of laminate solid colors

• How do some of the Mercedes Sprinter wall panel kits vary?

Mercedes Sprinters interior designs changed in 2018 with two key features that changes wall paneling:
1. Newer models began featuring factory holes on Upper Wall Panels. While the holes are still pre-drilled on the wall panels, they do not have correlating factory holes and the wall paneling will need to serve as a drilling template for rivet-nut installation. 

2. Newer models have redesigned rear doors that use exterior hinges as opposed to older models that require interior hinges. The wheel well panels in older models have a cutout specifically designed to house the retracting rear door catch. Additionally, lower back door panels have a different shape for older model sprinters.