Mercedes Sprinter (2007+) DRIFTR Ladder
$850.00
Pairs well with...
- Description
- Policies, Shipping, Warranty
- Installation Services
Roof racks make for great storage space to haul your equipment or camping gear around, but getting your stored items down can be a bit of a challenge. A Mercedes Sprinter has a high profile, and it’s impossible to pull down whatever you’ve stored on top without climbing up on something.
The Mercedes Sprinter 2014 DRIFTR ladder is the ideal companion to your new DRIFTR roof rack. This ladder bolts directly to the rack for a secure fit, and the steps are wider and deeper than any other ladder on the market, making it easier for you to climb up and down while carrying your gear. The ends of every step have added notches to provide extra traction in muddy or wet conditions.
Assembling and installing the Mercedes Sprinter DRIFTR ladder is easy. Assemble it loosely on the ground, then choose a location on your Sprinter where you’d like to install the ladder; this should be on the side opposite the van’s door, so the ladder doesn’t block the door’s sliding track. Hold the ladder in place with a friend’s help and mark the holes at the top of the ladder (onto the side of the roof rack) and underneath the van (on the pinch weld). These marks will indicate where to bolt your ladder in, so make sure the ladder is straight, level, and aesthetically pleasing before you proceed.
Drill into the rack and the pinch weld where you’ve marked, then install and fasten bolts on the top and bottom of the ladder. Push the middle of the ladder in to set the desired distance from the van and tighten the four bolts on each side of the ladder. Double-check that the bolts are secure and your DRIFTR ladder is ready to use. This DRIFTR ladder is compatible with Mercedes Springer High Roof Vans in 144, 170, and 170 EXT lengths, manufactured in 2014 or later.
Drop ships from outside vendor
Pair this ladder with the DRIFTR Roof Rack!
How to Mount:
Loosely assemble the entire ladder. Pick a good spot where you would like to place the ladder. Make sure the ladder is on the side of the van without the sliding door. Using a friend, hold up the entire ladder and mock it up. Stand far away from the van to see what looks most aesthetically pleasing and mark the holes both at the top of the ladder onto the side of the roof rack and mark the holes underneath the van on the pinch weld. These markings will be where the ladder mounts, so make sure your ladder is straight and aligned properly. After you've verified and marked where the ladder is going to be mounted, drill into the side of the DRIFTR rack and into the pinch weld at the bottom of the van. Install and fasten bolts on the top and bottom of the ladder, then push the middle ladder in or out to set the distance from the van to the ladder and tighten the 4 bolts per side of the ladder. Double check all bolts are tight, and you're good!
Compatible With 2014-current Mercedes Sprinter High Roof vans in 144, 170, and 170 EXT lengths.
WARNING: Some of the products listed contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. None of our products are intended to be used in conjunction with clean drinking water unless stated otherwise. For more info please visit www.p65warnings.ca.gov or contact the Backwoods Adventure Mods sales team.
***THIS PRODUCT IS MADE FOR OFFROAD USE ONLY***
Order Changes
Once an order is placed, we ask that all changes (concerning appliances, width, add-ons, material) be made in the following 7 DAYS. Any changes made after this time will be charged a 30% restocking fee. This policy has been implemented to further guarantee the quality of your order and reduce any inconsistencies.
Order Refunds
We strongly advise all customers to read over our refund policy. This is located at the top of the website home page under the "About" tab. Custom orders CANNOT be refunded once in production. The Serg Supply team will notify you when your product is going into production. Refunds cannot be issued after this point in the process. More details can be found on our Refund Policy Page.
Order Damages
If damage occurs to your order through shipping transit, please notate on your delivery documents. This will be visible by the pallet and/or the shrink wrap being damaged. After delivery, please email office@sergsupply.com for follow up. More details can be found on our Shipping Policy Page. This is located at the top of the home page under the "About" tab.
Shipping
Parcel
Orders with smaller items weighing less than 100lbs ship via UPS, FEDEX, or USPS.
Pallet
Any orders with items weighing over 100lbs or larger than 72" in any direction must be shipped on a pallet. Update: Shipping is free!
Each pallet is insured with liftgate service + residential charge applied. If you have a commercial address with a forklift, please state it in order notes for quicker delivery.
You can see our complete shipping policy here.
Local Pickup
Want to save time on shipping? Select the local pickup option at checkout and we will notify you when your order goes into production to set a pickup date.
Product Warranty
All products are covered under a 90-day manufacturer warranty to guarantee the quality of your product and quality of construction. If you should have any quality issues with your product, contact us at office@sergsupply.com.
Serg Supply now offers installation services!
For details on what products we service, prices, and Terms & Conditions, please review this document:
To schedule an installation, please email us at office@sergsupply.com or you can schedule an appointment on our website under the "Installation" top tab. Please state which product you wish to install, vehicle type, and if there are already products installed into your vehicle.
Ask a question
Have a question?
Enter your question below and we will get back to you as soon as possible. Please leave your phone number if you'd like a team member to call you.